09
2024
-
08
Common problems and solutions of slitting machine
Uneven cutting: It may be due to uneven cutting force caused by tool wear or incorrect tool position. The solution is to regularly check the degree of tool wear and replace severely worn tools in a timely manner; Adjust the position of the cutting tool to ensure it is in the appropriate cutting position.
Abnormal noise is emitted during the operation of the slitting machine: it may be caused by damaged bearings or loose transmission belts. The solution is to check the wear of the bearings and replace damaged bearings in a timely manner; Check the tension of the drive belt and adjust the tension in a timely manner.
During the cutting process, there may be material or tool jamming: it could be due to the workpiece being too hard or too thick, causing the tool to fail to cut properly, or it could be due to the tool being not sharp or the cutting parameters being set improperly. The solution is to choose appropriate cutting tools and cutting parameters to maintain the sharpness of the tools; Check the hardness and thickness of the workpiece, and select the appropriate cutting method.
Tool offset or deviation: It may be caused by unstable tool installation. The solution is to reinstall the tool, ensuring that its position is stable and vertical.
Burrs or unevenness on the cutting surface: It may be caused by excessive cutting speed or uneven cutting pressure. The solution is to adjust the cutting speed and pressure to ensure smooth and not too fast cutting.
Related News
This is crucial for the production of labels and stickers that require precise dimensions, ensuring product quality and consistency.
Characteristics of the laminating and slitting machine
1. Material cutting: The laminating and slitting machine can perform fast and accurate cutting on rolls or sheets. It is suitable for various materials such as paper, plastic film, rubber, fabric, etc.
The process flow of producing thermal conductive silicon film using a rolling machine
Thermal conductive silicone is a thermal conductive medium used to reduce the contact thermal resistance between the surface of the heat source and the contact surface of the heat sink component.
Copyright © 2024 WENZHOU CITY SANHUI MACHINERY MANUFACTURING CO, LTD