09
2024
-
08
How to repair a fully automatic cutting machine if it malfunctions
1、 The fully automatic cutting machine does not work properly after being turned on.
If there is no response after the fully automatic cutting machine is turned on, the following aspects need to be checked:
1. Is the power supply powered on: Check if the power supply is functioning properly and if the power switch is turned on.
2. Whether the circuit is connected properly: Check if the cable is firmly connected between the cutting machine and the power supply.
3. Controller malfunction: Check if the controller display screen is displaying normally. If the display screen is abnormal, it may be a hardware malfunction of the controller.
2、 The cutting quality of the fully automatic cutting machine is not ideal or cannot be cut.
If the fully automatic cutting machine is unable to cut properly or the cutting quality is not ideal during use, the following aspects need to be checked:
1. Whether the cutting tool is worn: If the cutting edge of the cutting machine is severely worn when cutting thick materials, it is easy to cause poor cutting quality, and the cutting tool needs to be replaced at this time.
2. Whether the cutting position is correct: It is necessary to check whether the cutting position matches the design position of the workpiece, including the length and inclination of the incision.
3. Whether the tool pressure is sufficient: Check whether the blade pressure meets the requirements. If the blade pressure is insufficient, it can also lead to poor cutting quality.
4. Is the positive pressure wheel damaged? If the positive pressure wheel is damaged during operation, it may also lead to poor cutting quality and require replacement.
3、 Automatic cutting machine circuit malfunction.
The circuit problems of fully automatic cutting machines are quite common. If the fully automatic cutting machine experiences a circuit failure during use, such as being unable to power on, the first thing to check is whether the power line is connected properly, whether the power switch is turned on, and whether the wiring in the distribution cabinet is disconnected.
In addition, if there is a circuit failure during the use of the machine, it may be caused by a circuit board failure. At this time, it is necessary to check whether the capacitors of the circuit board are expanding or whether there are solder joints falling off.
Related News
This is crucial for the production of labels and stickers that require precise dimensions, ensuring product quality and consistency.
Characteristics of the laminating and slitting machine
1. Material cutting: The laminating and slitting machine can perform fast and accurate cutting on rolls or sheets. It is suitable for various materials such as paper, plastic film, rubber, fabric, etc.
The process flow of producing thermal conductive silicon film using a rolling machine
Thermal conductive silicone is a thermal conductive medium used to reduce the contact thermal resistance between the surface of the heat source and the contact surface of the heat sink component.
Copyright © 2024 WENZHOU CITY SANHUI MACHINERY MANUFACTURING CO, LTD